Marchywka Effect

From Wikipedia, the free encyclopedia

The introduction to this article provides insufficient context for those unfamiliar with the subject. Please help improve the article with a good introductory style. (June 2009)

This article may be confusing or unclear to readers. Please help clarify the article; suggestions may be found on the talk page. (June 2009)

This article may require copy-editing for grammar, style, cohesion, tone or spelling. You can assist by editing it now.  (June 2009)

Apparatus Illustration
From the patent application[1], bipolar surface treatment is almost identical to a normal electrochemical apparatus except for lack of contact between target and electrodes. An EMF source (18) impresses a field in the medium via electrodes (14) and (16) producing the desired effect on (24) and (26) as masked by (28). The medium (12) can be an inert insulator, supporting a field with little current, a reactive conductor, or a soap solution. This differs from normal methods by a lack of contact between (24) and (14) or (16).
Category	Mineral

The Marchywka Effect^[2][3] refers to electrochemical cleaning of diamond using an electric field induced with remote electrodes. It was first observed by accident by Mike Marchywka^[1] while trying to find a selective means to etch non-diamond carbon and fabricate simple astronomical UV detection devices as described in the original paper by Marchywka, Pehrsson,Binari, and Moses.^[4] These devices required a few specific features such as clean surfaces and patterned areas of non-diamond carbon but the approach has subsequently been explored as a more general means to terminate carbon surfaces and selectively clean and etch various other materials or structures. The term "Marchywka Effect" is not used consistently and sometimes the term "bipolar surface treatment" is used^[5] as the substrate is induced to become a bipolar electrode^[6]. Various phrases such as"non-contacted electrochemical" process may also be used( see any references cited herein) or it may be mentioned as just an "electrochemical etch".^[7][8] While this is easily confused with various common electrochemical cells, and may appear to be a trivial and obvious extension of well known methods, recent patents such as US Patent No. 7435324^[9] continue to reference prior work such as US Patent No. 4153531,^[10] which cite non-contactedness as a feature.The use of a low conductivity medium as used in Marchywka et al.'s original paper^[4] is sometimes noted when it is used and may produce new effects.^[11][12] The apparatus to create the effect is similar to the well-known Electroporation system except that the biological specimen is replaced with an inorganic substrate but^[4] does note that in some cases organic films can be etched with this process using a Surfactant solution for the Electrolyte.

Isolated regions on semi-insulating substrate
Figure 1c in Marchywka et al. 1993[13]. Annular ring of semi-insulating diamond with discontiguous conducting graphitized regions etched with the non-contacted electrochemical process.
Category	Mineral

Contents 1 Surface effects 2 Earlier related approaches 3 Applications 4 References 5 External links

[edit] Surface effects

Bipolar Treated Diamond Surface in SEM
From Pehrsson etal.[14], bipolar treated diamond surface under SEM. The uniform SQUARE diamond plate acquires 3 distinct zones under the SEM after being exposed to the bipolar surface treatment. This diamond had been exposed to an applied field in distilled water creating a black( bottom), bright ( middle) and grey(top) region. The contrast appears to be due to changes in surface termination as described in Pehrsson etal.[14] This is a work of the US government and not subject to copyright restrictions. Special thanks to the authors and Naval Research Lab for making this available.
Category	Mineral

As suggested by the "non-contacted" phrase above, the effect differs from traditional electrochemical processes where carrier flow through the surface is achieved by connection to a current source with highly conductive materials such as copper wire. It is well known that materials contacted to an anode can be modified in a variety of ways including Anodizing and Electropolishing. And electrochemistry was recognized as an important related field in the popular press quickly once the first synthetic diamonds were made.^[15] However, the use of an induced field created by remote electrodes allows discontinuous areas on an insulating substrate to be cleaned, modified, or etched (similar to Electroetching), greatly expanding the role of electrochemical methods. This photograph shows disconnected conducting regions etched into a semi-insulating diamond subsrtate^[13]. Such a pattern would not be possible with traditional electrochemical etching. The mechanism is presumed to be due to the induced field but little in the way of exhaustive analysis has been done as the actual processes do not appear to differ from traditional approaches. For example, "identified as the ‘Marchywka Effect’ in the literature. The. etching may be due to the galvanic coupling of diamond. and non-diamond carbon".^[16] The applied field apparently creates directed surface modifications on polished diamond surfaces with little or no actual removal of material. This may be desirable for making various devices or simply studying the properties of the diamond surface. The induced field deposits or replaces a single layer of some molecule and this could be thought of as a monolayer Electroplating method. It has been elucidated in more fully in many works, including those of Pehrsson and Butler^[14] and pictures therein as well as many others such as ^[17].

[edit] Earlier related approaches

Many prior technologies exist for preparing the wide-gap diamond for use in electronic devices or as a substrate for single-crystal diamond growth. The more stable forms or carbon have lower gaps and different crystal structures and their presence must be carefully controlled. The Marchywka Effect has been characterised and compared to alternative means to create a desired surface for several applications. Removal of non-diamond carbon with wet chemicals had been accomplished by boiling in mixtures of sulfuric and chromic acid. When applied to a diamond substrate with an ion implantation damage profile as may be used for basic science, crystal growth, or device fabrication( for details on this system, see any of the review articles by JF Prins^[18] or US Patent Number 5385762^[19]), the electrochemical approach makes it easier to preserve the thin film of less-damaged diamond lying above the implant range and it has been used in annealing experiments to fix the diamond after implantation damage is done.^[20] In some cases, thermal cycling may be an issue and selectivity to various masks may be important, so the lower temperatures and more flexible chemistry may offer benefits over prior art. The method does not require the use of non-volatile materials such as chrome, possibly reducing contamination problems in some applications. The ability to control the etch direction and speed with an applied voltage or electrode configuration, as with electrochemical machining, gives additional capabilities not available with isotropic chemical-only approaches. Dry processing methods such as hot oxygen or plasmas can also burn off the graphite faster than the diamond as can a simple acetylene torch. These require higher temperatures and don't have the same high selectivity as can be achieved with the electrochemical approach. Various comparisons have been made in the literature.^[21] Surface termination is often an issue with both solid state and vaccuum devices and the details of final surface band structure have been compared with alternatives in various device structures, for example^{[22] [23]}

[edit] Applications

While the original effort failed to produce useful products, follow-on work in Europe did produce usable astronomical detectors^{[24] [25]} but without apparent use of this technology. In other areas, however, the approach seems to be competitive with prior art for making various end-products as it has been used as a fabrication step for experimental devices and structures. Many groups have used the approach to grow homoepitaxial diamond and subsequently release the thin-films with a variety of "lift-off" processes (see^[26] and ref. 4 therein). It has also been considered in contexts such as carbon MEMS production^[27] and different materials applications, for example Bradley's works on non-contacted palladium^[28][6] deposition and extensions such as United States Patent Number 7435324^[9] which, while not citing Marchywka et al.'s original paper, continue to cite non-contactedness as a feature, "The electrode assembly and the conductive surface may be positioned in close proximity to, but without contacting, one another" .^[9] references a much earlier patent^[10] covering related attempts to achieve non-contacted electro-etching, "The present invention relates to a method of and apparatus for electrochemically processing metallic surfaces of workpieces arranged in a contact-free manner with regard to the cathode and anode[...]."^[4] has been mentioned in passing with regard to novel devices such as quantum coherent devices^[29] while patents on emerging uses for amorphous carbon ^{[30] [31]} and diamond thermal conductors^[32] by manufacturers of high density electronic chips reference the related lift off technology.

[edit] References

[edit] External links

• Scirus Search Results
• Recent Related Patents
• Recent Citations that may reference Marchywka Effect

This article has not been added to any categories. Please help out by adding categories to it so that it can be listed with similar articles. (June 2009)

Category:Science you can do in your basement or garage or living room

Category:Semiconductor Processing Category:Astronomical Detectors Category:Diamond Electronics Category:Electrochemisty